Loading a new build in Zen Studio
I have a fresh .gpc. How do I get it onto the Zen?
Compiler tab → drag in the .gpc → Compile → drag to one of 8 slots → Play → unplug from PC → plug into console → pick the slot.
On this page
Each weekly update of the yew2K NBA 2K27 Cronus Zen script is a new .gpc from the Generator. Here is how it gets onto the Zen.
Ports first
| Port | What goes in it |
|---|---|
| A1 (front USB) | Your controller. |
| CONSOLE (rear) | Cable to the PS5, Xbox or PC. |
| PROG | Cable to the PC while you program. |
Which Zen Studio
Zen Studio Live (browser, Chrome recommended; current version 1.0.8) is the primary tool. Zen Studio Legacy 1.7.0 b7 still works for firmware up to 2.2.14. The firmware this site references is 2.3.2; the web updater is firmware.modcentral.ca (Chrome or Edge).
The steps
- Open Zen Studio and go to the Compiler tab.
- Drag the
.gpcin. - Press Compile.
- Drag the compiled script into one of the 8 memory slots.
- Press Play (the flash icon).
- Disconnect the Zen from the PC.
- Connect the Zen to the console.
- Pick the slot with the Zen's button.
How you know it worked
The OLED shows the script name when the script is loaded, not the Gearhead logo. yew2K shows its logo during a 1500 ms menu lockout at boot; after that, hold L2/LT and press Options/Menu to open the menu.
If you have to turn it off in a hurry
Hold PS/Xbox + L2/LT to switch the script off (the LED goes black). Hold PS/Xbox + R2/RT to switch it back on.
Related